This Citizen Watch from the third Promaster Aquamount series, were originally touted as an “Ultimate Outdoor Watch” – the world’s first watch that combines Depth meter with an Altimeter.
Citizen Promaster JP3040-59E come with a nice vintage-diver touch, albeit limited to ‘only’ 200m, with large golden-edged indices and skeleton hands and raised gold finished bezel indentations. Be warned these are huge, 49-50mm across both sensors, 16mm thick. Crystal is mineral, as on all other Aquamounts. This watch come with a combination of interesting looking hands especially that ultra-short hour hand and highly reflective orange second hand. JP3040-59E case is very traditional looking, bezel has 60-clicks and is very smooth, crown is knurled and signed with Promaster logo, case back is standard 200m Citizen diver case back solid links and lug ends, solid clasp folding part, push button release, solid diver extension. This measures seawater depth to 80m, altitude between -300 and 6300m, water and air temperature, barometric pressure, comes with dive alarms, logs last 4 dives and last 6 climbs, has alarm and chronograph. This watch is a combination watch equipped with a water depth gauge that measures water depth during diving, and an altimeter that measures altitude during mountain climbing and other high altitude activities. It has Altitude and Barometric Pressure Measurement functions, the altitude displayed by this watch is approximate altitude as calculated by applying external barometric pressure as detected with a pressure sensor to the relationship between altitude and barometric pressure of an international standard atmospheric model. The digital display of this watch uses three major modes consisting of the “Standard Mode”, “Water Depth Measurement Mode” and “Altitude Measurement Mode”. The barometric pressure change display is canceled when the watch is changed to the “Altitude Measurement Mode” or when all-reset is performed. In this case, the change in barometric pressure is displayed starting on the next hour. The chronograph function of this watch provided with this watch is able to measure elapsed time in 1/100 second units up to a maximum of 23 hours, 59 minutes and 59 seconds. The dive alarm mode uses a depth alarm and dive time alarm. When the alarm sounds for either the depth alarm or dive time alarm, it can be stopped by pressing any button.
Click here for more details : Citizen Men’s
Some Important Features:
Ana-digi Quartz movement.
Professional Divers Watch.
Electronic Depth meter (digital) to 80 meters in 0,1m-Steps.
Dive log-Memory for the last 4 Dives containing the following:
Number of Dive.
Maximum Depth.
Duration of Dive (up to 100 min).
Dive-Start-time & Dive-End-Time.
Average Depth.
Lowest Water temperature.
Depth alarm, Number of repeated Alarms presentable.
Dive-time-alarm ( 5 to 95 min., presentable in 5-min-Steps).
Ascending-alarm ( if faster than 9 meter / 1 Minute).
Electronic Altimeter (-300 tp + 6.300m) incl. 6 log memories for 6 waypoints (incl. Air pressure, Temperature, Time, Height).
Actual Air pressure.
Stopwatch (up to 24h in 1/100 sec).
Daily-alarm.
Temperature (-10° C to + 60° C in 0,1° C-Steps).
Programmed Calendar.
200m water resistant.
Case
Stainless steel Case and Band.
Battery
Battery Life: About 2.5 years.
Low Battery Indicator
Dimensions
Length: 49 mm.
Wide: 49 mm.
Height (thickness): 16.5 mm.
This watch is available for US $ 320.00 with us
Click here for more details and to purchase it : Citizen Aquamount Watch